|
Envirotex Lite is a reactive polymer compound (epoxy). It cures to a
thick, glossy coating in about 8-hour at 70-Degree f, and reaches full
strength and toughness in about 72-hour.
One coat is all that is usually required for a deep, high gloss finish.
However, two or more coats may be applied one over the other by simply
wiping the surface with a clean cloth and alcohol prior to recoating.
Envirotex lite may be used on wood, fabric, decals, bisque, photos,
paper, metal, models, painted surfaces, dried flowers, plaster, rocks,
sea shells... I can't promise the results on foam (it may melt the
foam).
After carefully mixing (follow the instructions!), you have about 30
minutes of "work" time, so be sure you have more-than-enough Envirotex
Lite mixed, and all the tools you might need at your immediate disposal.
Resin and hardener in one kit. This is the 4 ounce sampler kit.
 |
