An LED light with a vintage/Victorian style (already converted to a battery, and battery included). Also includes an on/off switch.
Approx. 43mm tall. A bit small for 1:12 scale, but could work for that scale, too.
Note: as these are already wired to a battery pack, you'll need to artfully hide the wires (if you don't want to cut and splice the wires after you run them through a small hole in your wall). Here are some ideas how to hide the wires:
1. Cut a slash in the wall (since the wires are really skinny, and run from the lamp for roughly 6" till the shrink-tubing) and slide the wires through your slash, then paper over to hide the slash later.
2. Run the skinny wires down the wall then hide the hole (if one is still needed) behind furniture or at the base of the wall. (And paper over the wires.)
3. Go ahead and cut a large hole to slide the lamp through, then add a decorative plate (with a small center opening) over the big hole.