August 21, 2011    

Sacred Heart Shrines + New Halloween Kit

Before I dive into all the fun Halloween goodies (and beautiful artwork by the Design Team), see that skeleton over at the left? If you jump quickly, you can still enter the Halloween Giveaway Challenge due today!

 
Sacred Heart Shrine Kits

Fancy Flaming Heart Milagro Shrine
Made from sturdy masonite. Arrives flat and is easy to assemble with just a bit of glue.

Completed shrine measures approx. 5-1/8" tall x 4" wide. The opening measures exactly 1" x 1" so perfect for inchies! the opening is 1/4" deep. Also as a bonus it has a hole on the back so you can hang it on the wall from a small nail.

And look at the beautiful shrine Design Team Coordinator Miz Bella (Kim Ayers) created using this kit!

Classic Flaming Heart Milagro Shrine
A similar masonite shrine kit, but without the sun ray/points. Completed shrine measures approx. 4-5/8" tall x 2-3/4" wide. A close-up of a shrine using this kit is at left, by Design Team Member Lynn Stevens.

Metal Nailhead Stickers
Design Team Member Kristin Batsel used the Fancy Flaming Heart Milagro Shrine with these stickers (kind of like a brad, but without the prongs that usually poke through paper... and with adhesive on the backs).

Elegant Winged Heart Milagro Shrine
Another in this series of larger shrine kits... this one with wings.

Flaming Heart Trinket (Tiny)
These are great for pendants, charms, or earrings. Completed charms measure approx. 1-1/8" tall x 3/4" wide. The inside hole measures approx. 3/8" tall x 1/4" wide and 1/8" deep.

 
Necklace Trinkets + Chain Kits + Other Masonite Shrines

Flaming Heart Sacred Trinket Shrine
The last in the masonite Sacred Heart Shrine-themed kits for today, but this one in a pendant size. Beautiful 'our nest' pendant at right is by Design Team Member Teri Calia.

The middle piece of this kit has two notches to hook the connectors from ball chain into (to turn the trinket into a pendant). Note: the connector needs to be from size 3 chain (like the connectors in the "Ball Chain Kits," see below; the mini connectors are too small and will just slip out).

Ball Chain Kits - in 3 Colors
96" of chain with 10 connectors. The connectors are a good size for the channels in the masonite Trinket kits. The connectors will also fit the tiny or mixed ball chains.

Window Necklace Trinket
Made from sturdy 1/8" masonite and easy to assemble with just a bit of glue. These are great for pendants, charms, or earrings. 2" tall x 1-1/4" wide x 3/8" thick.

This is another pendant kit with notches for ball chain connectors.

Tiny Cigar Box
The outside of the box measures approximately 2-1/2 x 3-1/2 x 3/4" tall and the inside measures 2-1/4 x 3-1/4 x 5/8" deep. The lid of the box sits on top, lifts off, and is held in place by the side pieces, which extend upward slightly. You could also attach the lid with hinges if desired (paper hinges or tiny metal ones).

Storefront Shrine Kit
Completed masonite shrine measures approx. 4" tall.

Note: the bottom of the front frame extends below the bottom of the "box" so the shrine sits at a jaunty angle.

Also note: you can use the shrine upside-down (with the tall part above the window at the bottom) as a mini Punch & Judy theatre (but, you'll need to either wall-mount your piece or sit it on a small spool or other object, so it doesn't tip over).

House Stand-ups
Masonite, 1-7/8" tall (not including the base which makes them 2" tall) x 1-1/8" wide. Perfect for displaying your inchies. Easy to assemble, just pop out and place the bottom into the stand.

 
New Halloween Kit

Halloween Witch Shrine Kit
Ooo! Another great kit. Put them together to make a little Halloween Witch Shrine, like Teri's sample art right (with lots of components to spare), or use them on other Halloween-y projects.

Includes a masonite shrine kit, collage sheets, ribbons, dresden, a glass vial of glitter... everything you'd need to make a little Halloween shrine.

Halloween Mini-Dash Shrine Kit
The same shrine that's included in the Halloween Witch Shrine Kit. Easy to assemble laser-cut masonite. The backs and sides are a spider web and the kit also comes with a masonite bat and spider to put anywhere you like. Finished shrine measures 2-1/4" wide, 3-1/2" tall (not including the top decoration) and 5/8" deep.

Halloween Glitter In Bottle
My own color mix, packaged in a small glass bottle with a cork.

Pretty enough to leave in the bottles and use in a tiny shrine (Teri used some and still had plenty left to leave in the bottle for the shrine).

 
Lots More Halloween Die-Cuts

Spider Web ATC Overlays
Set of 4 spider webs! Each measures 2-1/2" x 3-1/2" and you can use them vertically or horizontally. 1/16" thick black mat board.

Bat Cut-Outs
Package of 15 bats. The smallest measures approximately 1-1/4" across and the largest approximately 1-7/8" across.

Dead Tree Cut-outs
3-3/4" to 4-1/4" tall. 1/16" thick black mat board. Set of 4.

Gravestone Stencil Border
Lightweight stencil board (stencils are made thin enough to wrap around curves/corners when stenciling). Use a stencil brush so that your brushstrokes won't push paint under the edges of the cut-out design (or spray with a mister or spray paint to apply your color).

The row at the bottom of the photo are "left overs" after I popped them out of the laser-cut stencil. Treat them as bonus chipboard art fodder.

If you're planning to use the stencil a lot, I would use spray shellac to seal the stencil before you get paint on it (an oil-based varnish, rather than a water-based acrylic spray will last longer). Spray a few layers and let dry. Flip it over and do again.

Entire sheet is approx. 4" x 5"

Witches, Black Cats and Hats Cut-outs
3 witches 2-1/2" x 2", 3 cats approx. 1" and 6 hats ranging from 5/8" - 7/8" tall. 1/16" black mat board.

Witch Hat Cut-Outs
30 hats in 2 styles. They range from 1/2" - 2" tall.

Gravestone ATC Border Overlays
2 each of 2 sizes: 2" x 3.5" and 2" x 2.5" so you can make vertical and horizontal ATCs. 1/16" black mat board.

Gravestone Chipboard Stand-ups
Easy to assemble, just pop out and place the bottom of the gravestone into the stand.

Sizes from 1" - 1-7/8" tall x 1/2" - 3/4" wide. Pack of 12.

 
Even More Halloween

11 Day of the Dead Charms
Great selection for jewelry or those Sacred Heart Shrines above. All are double-sided and beautifully detailed. Antiqued gold- or silver-plate over cast pewter. All pewter is lead free and made in USA. The necklace using the Our Lady Connector (at right) is by Guest Designer Wendy Anderson.

Black Gesso
Claudine Hellmuth Studio Black Gesso is ideal for priming all your surfaces, including canvas, boxes, journal pages and chipboard. Gesso adds subtle texture (called "tooth") when applied, allowing a surface to accept paint and other mediums more easily. This quick drying, artist-quality Black Gesso provides opaque coverage and remains flexible, even on fabric. Paint over the top of dry gesso with other paints.

5 Midnight Dreary Scrapbook Papers
Nicely dark papers for a spooky night. Perfect for a creepy Halloween layout. 12" x 12", double-sided sheets.

Two 12x12 "Afterglow" Scrapbook Papers
12" x 12" double-sided cardstock sheets with orange and black Halloween designs.

Plastic Skeletons
Moveable legs (but not arms... but Wendy recommends cutting the whole thing apart and gluing it back together any which way you like).

Small Resin Skull Beads
Skulls have holes from top to bottom. Approx. 3/8" tall.

Plus: Resin Skull Beads are back in stock!

3 Tiny Halloween Clear Stamp Sets
Includes a set of six stamps that are pieces of a skeleton (far right). Two arms, two legs, the body and the skull. Put together it would be approximately 4" tall. You can vary the position of the arms & legs (and the skull... in case your skeleton is missing his head).

Stacking Square Paper Punch
11/16" wide (almost 3/4"); Use with a 1" square punch for a graduated border.

And check out the Fortune Teller House by Design Team Member Rhonda Secrist Thomas(at left)! Rhonda used the Stacking Square Paper Punch to frame the letters from the Circus Alphabet Rubber Stamp Set.

Laughing Pirate Skull Cabochons (Cameos)
Either of these resin cameos will work in any of the 25x18mm or 40x30mm settings or directly on a collage.

 
Miscellaneous

Mighty Punch Kit
Durable and easy to use (really! even with my gimpy carpel-tunnel wrists); no electricity required. Ideal for cold connections and creating jewelry components. It will Punch through metals up to 16 gauge in thickness.

Hardened dies and punches create 7 different hole sizes: 2.38, 3.18, 3.97 4.76, 5.56, 6.35, 7.14 millimeter (3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32 inch). Dies, punches, and storage slots are all marked with size for accuracy. Adjustable throat with depth gauge adjusts to depths from 1/4" to 1-1/2" from the edge. Sturdy plastic storage case with handle.

Ornate Oval Filigree
Raw brass (lead free and made in USA).

Tiny Double-Sided Starfish
Nicely detailed (on both sides). Raw brass (lead-free and made in the USA).

Antique Gold Starfish
Antiqued gold-plated plastic (so quite lightweight for the size). Double sided.

Antique Gold Moon with Stars
Antiqued gold-plated plastic (so quite lightweight for the size). Double sided.

Large Connected Brass Leaves
Raw brass (lead free and made in USA).

Tiny Luggage Tags
Did I mention tiny?

Swallow Charms - 2 Colors
Double-sided design. Approx. 18mm x 17mm

Rose Connectors - 3 Colors
14 x 14mm. 4 loops, though you can snip off one or more.

French Royal Crown (Raw Brass)
Beautiful royal crown with fleur-de-lis border. Sold singly. Also included in the Brass Crown Set.

Giant Brass Scissors
Raw brass (lead free and made in USA).

Stork Scissors
I'm not sure what these are made of... some uncoated base metal. Might be a good item to toss into some Liver of Sulphur and see what happens.

Silver/Jet Spacer
Antiqued cast pewter. Two parallel holes; flat on back.

The Magic of Oz: Die-Cut Tags - 2 Sets
Each set is 7-1/2" x 12-1/2". The tags are die-cut in lots of small sizes (on chipboard). The little hole in each tag is also die-cut (for hanging on a string or other closure). Printed in the USA (that's a rarity with large scrapbook paper companies).

Tag in a Bag
2-1/4" x 3-3/4" cards in little paper bags.

The bags are fairly heavy paper (2-3/4" x 3-3/4"). The bags are also big enough to fit a standard ATC card. 12 sets per package.

Antique Bone Dominoes
Pre-drilled for stringing as a bracelet. They work well as feet for shrine boxes, too. 30x20mm.

Tiny Clothespins - 2 New Colors
Sets of 25 miniature clothespins. 1" long; wooden.

Large Brass Songbird
A nice, plump bird. (And facing in the opposite direction of the equally large Bird On A Branch, in case you'd like relative symmetry.) Raw brass (lead free and made in USA).

Incredi-Sheets
Crystal clear, double-sided adhesive sheets. Acid Free. Permanent. Heat Resistant. Works great with vellum, foils, flock, glitter, embossing powder, beads, etc.

Package of three 6" x 10" sheets.

 
Not New to the Site, But Newly On Sale!

Large Brass Octopus
Raw brass (lead free and made in USA). Vintage patina sample made by Design Team Coordinator Miz Bella (Kim Ayers) using Liver of Sulphur Gel.

French Ticking Dye Box Collage Sheet
This box "kit" (based on a vintage crayola box) is perfectly sized to hold ATCs (though it's perfect for small gifts, too). Also includes two ATC-sized images to alter and several bits of coordinating collage snippets.

Hint, hint: use the negative space after you've cut out the box as a stencil to make your own ATC boxes.

Starfish Connectors
16 starfish with a brass oxide finish. Approx 15mm wide each.

Oxidized Black Head Pins
The head pins come 100 pieces per package (in 1-1/2" and 2" length).

Haven 12x12 Scrapbook Papers + Faded Label Clear Stamp
Seven double-sided papers with a vintage songbook/schoolbook theme, plus a sweet label/banner stamp.

Daily Junque Ephemera
Nice set of artfully distressed flash cards, word strips and other fun (die-cut) odds & ends. Packaged in a glassine envelope. Package includes 27 pieces.

Halloween Glitter Postcards in Tin
Reproductions of gorgeous postcards with fine silver glitter. 12 postcards (2 each of 6 designs). Postcards are 3-7/8" x 5-7/8". The backs are printed with a vintage "Postcard" graphic (with the normal space for writing notes and address).

Christmas Glitter Greetings
A fantastic set of 12 Santa postcards (2 each of 6 designs). Each postcard has fine silver glitter accents and come in a hinged tin. The backs are printed with a vintage "Postcard" graphic (with the normal space for writing notes and address).

Father Christmas Punchouts
Heavy, single-sided cardstock. Printed and die-cut into 35 tags, borders and triangular flags.

Crown Ribbons
White or pink 1/4" wide grosgrain, printed in black ink with tiny crowns.

Chipboard Wing Cut-Outs - Large
Bat wings (my favorite), 2 designs of angel wings and butterfly wings. 1/8" thick laser-cut chipboard. 4 pairs, 8 total pieces per package (2 sheets of chipboard per package). 2-7/8" to 4" wide.

All Distress Ink Pads & Reinkers
Distress Inks by Tim Holtz are perfect for adding a vintage, stained, or aged effect to your paper/collage projects. These hand-selected colors were developed to produce a realistic, weathered look on paper, photos and decorative fibers.

 
Back in Stock

Moon Face Cabochon

1/4 Inch Silk Ribbons - Cream

Antiqued Steel Chain - Both Sizes

40x30mm Black Resin Settings

40x30mm Clear Cabochons

The Magic of Oz Scrapbook Paper

Pocket Watches

Stamped Flourishes

  

 
 

Small Seahorse Charms

Masonite ATCs

Shrine Necklace Trinket

Black Resin Sparrows - new lower price

Coffin Trinkets

ATC Frames - Gothic Arch

25x18mm Black & Ivory Resin Settings

Conservatory Clear Stamp Set

 
If you'd like to be notified when new items are added or contests/swaps are announced, you can sign up to receive this newsletter.